Analysis of AC link topologies in non-isolated DC/DC triple active bridge converter for current stress minimization

This paper presents analysis of the non-isolated DC/DC triple active bridge (TAB) converter under various purely inductor-based AC link topologies. The objective of the analysis is to find the topology that incorporates the least value of the AC link inductors which leads to reduced converter footprint in addition to minimum internal current stresses. Modelling of the TAB under each of the different topologies is presented in per unit expressions of power transfer and reactive power assuming fundamental harmonic analysis. The power expressions are used to calculate the inductor values necessary to achieve same rated power transfer of Dual Active Bridge (DAB) converter for the sake of standardizing comparison. On this basis, the topology requiring the least value of interface inductors, hence lowest footprint, is identified. Furthermore, based on phase shift control, particle swarm optimization (PSO) is used to calculate optimal phase shift ratios in each of the proposed topologies to minimize reactive power loss (hence current stress). The topology with minimum stresses is therefore identified and the results are substantiated using a Matlab-Simulink model to verify the theoretical analysis

Generic closed loop controller for power regulation in dual active bridge DC-DC converter with current stress minimization

This paper presents a comprehensive and generalized analysis of the bidirectional dual active bridge (DAB) DC/DC converter using triple phase shift (TPS) control to enable closed loop power regulation while minimizing current stress. The key new achievements are: a generic analysis in terms of possible conversion ratios/converter voltage gains (i.e. Buck/Boost/Unity), per unit based equations regardless of DAB ratings, and a new simple closed loop controller implementable in real time to meet desired power transfer regulation at minimum current stress. Per unit based analytical expressions are derived for converter AC RMS current as well as power transferred. An offline particle swarm optimization (PSO) method is used to obtain an extensive set of TPS ratios for minimizing the RMS current in the entire bidirectional power range of - 1 to 1 per unit. The extensive set of results achieved from PSO presents a generic data pool which is carefully analyzed to derive simple useful relations. Such relations enabled a generic closed loop controller design that can be implemented in real time avoiding the extensive computational capacity that iterative optimization techniques require. A detailed Simulink DAB switching model is used to validate precision of the proposed closed loop controller under various operating conditions. An experimental prototype also substantiates the results achieved

Generalized small-signal modelling of dual active bridge DC/DC converter

this paper presents a novel generalised approach of the small-signal modelling of dual active bridge (DAB) DC/DC converter. The adopted analysis is based on a per-unit fundamental frequency representation of the DAB. The outcome of the proposed modelling approach is a small signal, linearised, state-space DAB model; which is considered as a main building block for future control applications. The developed small signal DAB model includes all possible degrees of freedom affecting the performance of the DAB; this includes the voltage conversion ratio to allow the study of all DAB operation modes (i.e.: unity-gain and buck/boost modes.). Furthermore, since triple phase shift control (TPS) is used in this development work, the proposed model incorporates phase shift in addition to duty ratios. This feature allows for bridge voltage regulation, which is essential for efficient DAB operation in the case of buck/boost operation. Another key achievement is that the proposed small signal modelling methodology can be applied to any bidirectional DC-DC converter regardless of ratings, parameter values and number of ports. Extensive simulation is carried out to verify the proposed analysis

A new active power controller in dual active bridge DC-DC converter with a minimum-current-point-tracking technique

This article proposes a new controller for power regulation in dual active bridge (DAB) dc-dc converter based on a new scheme that tracks minimum RMS current to ensure minimum losses. The proposed controller is based on an implementation of perturb and observe (PO) tracking method that enables minimum current point tracking (MCPT) at any desired level of active power transfer and dc voltage ratio. The PO is embedded in a closed-loop control scheme which simultaneously regulates active power in DAB converter. The nonlinear I - V characteristic of DAB presents the basis for this proposed controller and the rationale of using PO algorithm. The proposed controller does not require complex nonlinear converter modeling and is not circuit parameter dependent. Design procedure of the proposed controller is presented, and extensive simulation is carried out using MATLAB/Simulink to validate the effectiveness of the proposed MCPT closed-loop controller. An experimental prototype also substantiates the results achieved

Generalized active power flow controller for multi active bridge DC-DC converters with minimum-current-point-tracking algorithm

This paper proposes a new active power flow controller for DC-DC multi active bridge (MAB) converters with minimum current point tracking (MCPT) to minimize conductive losses. Unlike recent efforts in this area, the proposed controller does not require look-up table for implementation nor complex non-linear converter modelling and is not circuit parameter-dependent. The proposed control scheme is also generalized for MAB converters with any number of ports and is derived in per unit form to enable standard implementation for buck/boost/unity-gain operating modes. The proposed MCPT algorithm is based on an innovative adaptive perturb and observe (P&O) tracking of the minimum current point (MCP) on the MAB converter current characteristic plane. This MCP is tracked while active power regulation is simultaneously achieved based on a new phase shift decoupler to enable direct regulation of individual port active power. Detailed design procedure of the proposed controller is presented and extensive simulation is carried out to validate the effectiveness of the proposed MCPT closed loop controller. Experimental implementation is also provided to substantiate the simulation results